Miles per hour to Feet per second Converter
Convert Miles per hour (mph) to Feet per second (ft/s) instantly, or use the conversion table below to look up common values.
Miles per hour to Feet per second conversion table
| Miles per hour (mph) | Feet per second (ft/s) |
|---|---|
| 1 | 1.466667 |
| 2 | 2.933333 |
| 3 | 4.4 |
| 4 | 5.866667 |
| 5 | 7.333333 |
| 10 | 14.666667 |
| 25 | 36.666667 |
| 50 | 73.333333 |
| 100 | 146.666667 |
How to convert Miles per hour to Feet per second
1 mph equals 1.466667 ft/s. Use the converter above for any value, or read the table for common conversions.
ft/s = mph × 1.4666666666666666 · mph = ft/s × 0.6818181818181819Multiply a miles per hour figure by 1.466667 to get feet per second, or divide it by 0.681818 to go the other way.
Worked examples
- 1 mph= 1.466667 ft/s
- 5 mph= 7.333333 ft/s
- 10 mph= 14.666667 ft/s
- 30 mph= 44 ft/s
- 50 mph= 73.333333 ft/s
What these units are
Miles per hour (mph). A mile per hour is 0.44704 meters per second. It is the road-speed unit in the United States and the United Kingdom, and appears on imported vehicle speedometers.
Feet per second (ft/s). A foot per second is 0.3048 meters per second. It is used in aviation, engineering and wind-speed figures in imperial-measure countries.
The 3.6 factor between m/s and km/h is exact, so those two convert losslessly. Knots and miles per hour are exact definitions as well.
Converting Miles per hour to Feet per second in practice
Working in miles per hour
A mile per hour is one statute mile, exactly 1,609.344 meters, travelled in one hour. Miles per hour and kilometers per hour relate by exactly 1.609344, and one mile per hour is exactly 0.44704 meters per second.
It is used on road signs and in vehicle speed limits, in motoring and tyre specifications, in wind and weather reports, and in aviation and motorsport figures.
One mile per hour is exactly 1.609344 km/h, and that metric relationship needs no rounding. A knot is not a mile per hour, since one uses the nautical mile of 1,852 meters and the other the statute mile.
Treating a mile per hour as a knot is the usual mistake, because both count distance over an hour. A vessel or aircraft figure in knots needs the nautical mile before it can be compared with road speed.
The siblings are kilometers per hour, knots and meters per second. Posted road speeds in miles per hour belong to this unit, metric road and wind figures belong to kilometers per hour, navigation belongs to knots, and scientific measurement belongs to meters per second.
Checking a miles per hour to feet per second conversion
Every speed unit is a distance over a time, so the conversion factor is just the distance factor divided by the time factor. Meters per second to kilometers per hour is a single multiplication by exactly 3.6, and a reader can hold that number.
The candidates for confusion are the mile and the nautical mile, because both appear in speed units. A knot is one nautical mile per hour, and a nautical mile is 1,852 meters against the statute mile's 1,609.344, so a knot is about 15% faster than a mile per hour. Treating the two as interchangeable understates a marine or aviation speed.
To check a speed conversion, convert it to meters per second and compare with something known, such as walking pace. The error to avoid is applying the 3.6 factor to a pair that is not m/s to km/h, when the correct move is to convert the distance and the time separately.
Tanzania reference points
Real quantities, converted into the units on this page.
The speed limit in built-up areas in Tanzania
50 km/h = 31.06856 mph = 45.567221 ft/s
Source: Road Traffic Act [Cap.168 R.E 2002] s.51, summarised by FB Attorneys · verified 2026-09-14
The maximum speed outside built-up areas for vehicles over 3,500 kg in Tanzania
80 km/h = 49.709695 mph = 72.907553 ft/s
Outside built-up areas the limit for other vehicles is set by posted signs and road markings rather than a single national figure.
Source: Road Traffic Act [Cap.168 R.E 2002] s.51, summarised by FB Attorneys · verified 2026-09-14
Related conversions
More speed conversions you can convert instantly.