Meters per second to Feet per second Converter
Convert Meters per second (m/s) to Feet per second (ft/s) instantly, or use the conversion table below to look up common values.
Meters per second to Feet per second conversion table
| Meters per second (m/s) | Feet per second (ft/s) |
|---|---|
| 1 | 3.28084 |
| 2 | 6.56168 |
| 3 | 9.84252 |
| 4 | 13.12336 |
| 5 | 16.404199 |
| 10 | 32.808399 |
| 25 | 82.020997 |
| 50 | 164.041995 |
| 100 | 328.08399 |
How to convert Meters per second to Feet per second
1 m/s equals 3.28084 ft/s. Use the converter above for any value, or read the table for common conversions.
ft/s = m/s × 3.280839895013123 · m/s = ft/s × 0.3048Multiply a meters per second figure by 3.28084 to get feet per second, or divide it by 0.3048 to go the other way.
Worked examples
- 1 m/s= 3.28084 ft/s
- 5 m/s= 16.404199 ft/s
- 10 m/s= 32.808399 ft/s
- 30 m/s= 98.425197 ft/s
- 50 m/s= 164.041995 ft/s
What these units are
Meters per second (m/s). The meter per second is the SI unit of speed. It is used in science and engineering, where distances are in meters and time in seconds.
Feet per second (ft/s). A foot per second is 0.3048 meters per second. It is used in aviation, engineering and wind-speed figures in imperial-measure countries.
The 3.6 factor between m/s and km/h is exact, so those two convert losslessly. Knots and miles per hour are exact definitions as well.
Converting Meters per second to Feet per second in practice
Working in meters per second
The meter per second is the SI unit of speed, one meter travelled in one second. One meter per second is exactly 3.6 kilometers per hour, a fixed factor that links the two units.
It is the unit of physics and engineering calculation, of wind and water current measurement, and of athletics, where sprint times and running speeds are reported in meters per second.
Multiplying a speed in m/s by 3.6 gives km/h exactly, and dividing by 3.6 returns m/s without rounding. A knot rests on the nautical mile and a mile per hour on the statute mile, so they are distinct units.
A frequent error is reporting a wind or current figure in knots when the source gave miles per hour, or quoting m/s for a road speed. Matching the unit to the context avoids a silent factor error.
Kilometers per hour, miles per hour and knots are the sibling units. Laboratory and weather measurement work in meters per second, driving and road postings use kilometers per hour or miles per hour, and marine and air navigation use knots.
Checking a meters per second to feet per second conversion
Every speed unit is a distance over a time, so the conversion factor is just the distance factor divided by the time factor. Meters per second to kilometers per hour is a single multiplication by exactly 3.6, and a reader can hold that number.
The candidates for confusion are the mile and the nautical mile, because both appear in speed units. A knot is one nautical mile per hour, and a nautical mile is 1,852 meters against the statute mile's 1,609.344, so a knot is about 15% faster than a mile per hour. Treating the two as interchangeable understates a marine or aviation speed.
To check a speed conversion, convert it to meters per second and compare with something known, such as walking pace. The error to avoid is applying the 3.6 factor to a pair that is not m/s to km/h, when the correct move is to convert the distance and the time separately.
Tanzania reference points
Real quantities, converted into the units on this page.
The speed limit in built-up areas in Tanzania
50 km/h = 13.888889 m/s = 45.567221 ft/s
Source: Road Traffic Act [Cap.168 R.E 2002] s.51, summarised by FB Attorneys · verified 2026-09-14
The maximum speed outside built-up areas for vehicles over 3,500 kg in Tanzania
80 km/h = 22.222222 m/s = 72.907553 ft/s
Outside built-up areas the limit for other vehicles is set by posted signs and road markings rather than a single national figure.
Source: Road Traffic Act [Cap.168 R.E 2002] s.51, summarised by FB Attorneys · verified 2026-09-14
Related conversions
More speed conversions you can convert instantly.