Feet per second to Kilometers per hour Converter
Convert Feet per second (ft/s) to Kilometers per hour (km/h) instantly, or use the conversion table below to look up common values.
Feet per second to Kilometers per hour conversion table
| Feet per second (ft/s) | Kilometers per hour (km/h) |
|---|---|
| 1 | 1.09728 |
| 2 | 2.19456 |
| 3 | 3.29184 |
| 4 | 4.38912 |
| 5 | 5.4864 |
| 10 | 10.9728 |
| 25 | 27.432 |
| 50 | 54.864 |
| 100 | 109.728 |
How to convert Feet per second to Kilometers per hour
1 ft/s equals 1.09728 km/h. Use the converter above for any value, or read the table for common conversions.
km/h = ft/s × 1.09728 · ft/s = km/h × 0.9113444152814232Multiply a feet per second figure by 1.09728 to get kilometers per hour, or divide it by 0.911344 to go the other way.
Worked examples
- 1 ft/s= 1.09728 km/h
- 5 ft/s= 5.4864 km/h
- 10 ft/s= 10.9728 km/h
- 30 ft/s= 32.9184 km/h
- 50 ft/s= 54.864 km/h
What these units are
Feet per second (ft/s). A foot per second is 0.3048 meters per second. It is used in aviation, engineering and wind-speed figures in imperial-measure countries.
Kilometers per hour (km/h). A kilometer per hour is 0.277778 meters per second. It is the unit on road signs and vehicle speedometers in Tanzania and most countries.
The 3.6 factor between m/s and km/h is exact, so those two convert losslessly. Knots and miles per hour are exact definitions as well.
Converting Feet per second to Kilometers per hour in practice
Reading the result in kilometers per hour
Kilometers per hour measures how many kilometers are covered in one hour. The relationship with meters per second is exact: 1 m/s is exactly 3.6 km/h, so the two units differ by a fixed factor of 3.6.
The unit appears on road signs and in vehicle speed limit legislation, in wind and weather reports, in cycling and motoring specifications, and in everyday estimates of travel time over a known distance.
The metric relationships are exact, since 1 m/s is exactly 3.6 km/h and dividing a km/h value by 3.6 returns m/s. A knot is not a mile per hour, because the nautical mile and the statute mile are different lengths.
The usual error is reading a km/h figure as miles per hour, or treating a knot as a mile per hour because both describe distance over an hour. The unit label decides which conversion applies.
Miles per hour and knots are the siblings most easily confused with kilometers per hour. Kilometers per hour carries road postings and weather reports, miles per hour appears where signs are posted in that unit, and knots governs sea and air navigation.
Checking a feet per second to kilometers per hour conversion
Every speed unit is a distance over a time, so the conversion factor is just the distance factor divided by the time factor. Meters per second to kilometers per hour is a single multiplication by exactly 3.6, and a reader can hold that number.
The candidates for confusion are the mile and the nautical mile, because both appear in speed units. A knot is one nautical mile per hour, and a nautical mile is 1,852 meters against the statute mile's 1,609.344, so a knot is about 15% faster than a mile per hour. Treating the two as interchangeable understates a marine or aviation speed.
To check a speed conversion, convert it to meters per second and compare with something known, such as walking pace. The error to avoid is applying the 3.6 factor to a pair that is not m/s to km/h, when the correct move is to convert the distance and the time separately.
Tanzania reference points
Real quantities, converted into the units on this page.
The speed limit in built-up areas in Tanzania
50 km/h = 45.567221 ft/s
Source: Road Traffic Act [Cap.168 R.E 2002] s.51, summarised by FB Attorneys · verified 2026-09-14
The maximum speed outside built-up areas for vehicles over 3,500 kg in Tanzania
80 km/h = 72.907553 ft/s
Outside built-up areas the limit for other vehicles is set by posted signs and road markings rather than a single national figure.
Source: Road Traffic Act [Cap.168 R.E 2002] s.51, summarised by FB Attorneys · verified 2026-09-14
Related conversions
More speed conversions you can convert instantly.