Megapascals to Pounds per square inch Converter

Megapascals (MPa). A megapascal is 1,000 kilopascals, or one million pascals. It is used for concrete strength, where structural concrete is typically specified between 20 and 40 MPa.

Pounds per square inch (psi). One psi (pound per square inch) is 6,894.757293168 pascals. It is the tyre-pressure and hydraulic unit in the United States and the UK.

Bar, atmosphere and psi are exact definitions. Gauges and weather stations round heavily, so treat the last digit as indicative rather than precise.

Pressure units are all defined against the pascal, so the conversion is a multiplication by a fixed number. What makes this dimension awkward is that the numbers sit within tens of per cent of each other, so a small slip looks plausible.

Three of the units are close together on purpose: one bar is 100,000 pascals, one atmosphere is 101,325, and weather reports use millibars and hectopascals, which are the same size. A reading that looks like a unit error is often a genuine difference between gauge pressure and absolute pressure instead.

Checking a pressure conversion means converting through pascals and comparing with a known reference, such as the fact that a bar and an atmosphere differ by about 1.3%. The error to watch for is quoting a pressure without saying whether it is measured above atmospheric pressure or from a vacuum.