Megawatts to Horsepower (mechanical) Converter
Convert Megawatts (MW) to Horsepower (mechanical) (hp) instantly, or use the conversion table below to look up common values.
Megawatts to Horsepower (mechanical) conversion table
| Megawatts (MW) | Horsepower (mechanical) (hp) |
|---|---|
| 1 | 1,341.02209 |
| 2 | 2,682.044179 |
| 3 | 4,023.066269 |
| 4 | 5,364.088358 |
| 5 | 6,705.110448 |
| 10 | 13,410.220896 |
| 25 | 33,525.55224 |
| 50 | 67,051.10448 |
| 100 | 134,102.20896 |
How to convert Megawatts to Horsepower (mechanical)
1 MW equals 1,341.02209 hp. Use the converter above for any value, or read the table for common conversions.
hp = MW × 1341.0220895950279 · MW = hp × 0.0007456998715822703Multiply a megawatts figure by 1,341.02209 to get horsepower (mechanical), or divide it by 7.457e-4 to go the other way.
Worked examples
- 1 MW= 1,341.02209 hp
- 5 MW= 6,705.110448 hp
- 10 MW= 13,410.220896 hp
- 100 MW= 134,102.20896 hp
- 500 MW= 670,511.044798 hp
What these units are
Megawatts (MW). A megawatt is 1,000 kilowatts. It is used for power stations, industrial loads and grid capacity, where large generator sets run into the megawatts.
Horsepower (mechanical) (hp). Mechanical horsepower is 745.7 watts, the unit used for engine and motor output in the United States and UK. It is a different size from metric horsepower.
Metric power conversions are exact. Check whether a horsepower figure is mechanical or metric before comparing two engines.
Converting Megawatts to Horsepower (mechanical) in practice
Working in megawatts
A megawatt is 1,000 kilowatts, or one million watts, and it carries the symbol MW. Power at this scale is quoted in megawatts because a figure in kilowatts would run to several digits.
Grid-scale generating stations, industrial plants, large data centres and utility-scale solar farms are described in megawatts of capacity. Transmission and distribution planning also uses the unit for load forecasts.
A megawatt measures capacity, which is a rate, while a megawatt-hour measures delivered energy. One megawatt sustained for one hour therefore equals one megawatt-hour, or 3.6 gigajoules.
Reporting a plant's output as megawatts when the figure is megawatt-hours confuses capacity with production. The two differ by the operating time, so a megawatt figure alone says nothing about how much energy was generated.
Megawatts describe capacity at grid and industrial scale, while kilowatts describe the appliances and generators on the same site. The unit is also mistaken for the megawatt-hour, which is a sibling in the energy dimension; capacity and delivered energy are not the same figure.
Reading the result in horsepower (mechanical)
Mechanical horsepower is exactly 745.7 watts, and metric horsepower is exactly 735.49875 watts. The two definitions differ by about 1.4 percent, so a figure carries a larger number in mechanical horsepower.
Vehicle engine output, pump and compressor motors, and agricultural machinery are commonly rated in horsepower. Metric horsepower is used for engine figures in much of Europe and Asia, while mechanical horsepower dominates in the United States.
Power is a rate, so multiplying horsepower by a running time gives an energy amount in joules or watt-hours. The gap of about 1.4 percent between the two horsepower definitions is carried through every conversion to watts.
Comparing two engine ratings without knowing which horsepower definition applies is the usual error, and the numbers are not interchangeable. The definition behind a figure should always be established before it is converted.
Horsepower is the unit for engine output, while kilowatts fit appliances, generators and inverters, and BTU per hour fits heating and cooling equipment. Metric horsepower is a separate sibling, so a PS figure and an hp figure differ even when they describe the same engine.
Checking a megawatts to horsepower (mechanical) conversion
Within the metric units a power conversion is a power of a thousand: watts to kilowatts, kilowatts to megawatts, and back. Those pairs are decimal shifts and a reader can do them without a converter.
Anything involving horsepower is a multiplication by a definition rather than a shift, and there are two definitions. Mechanical horsepower is exactly 745.7 watts and metric horsepower exactly 735.49875 watts, so the same engine carries a larger figure in mechanical horsepower than in metric.
When checking a power conversion, convert to watts first, because every unit in this dimension is defined against the watt and the intermediate value makes the comparison obvious. The trap is comparing a horsepower figure with a kilowatt figure without establishing which horsepower was quoted.
Tanzania reference points
Real quantities, converted into the units on this page.
Tanzania's installed electricity generation capacity
2,881.332 MW = 3,863,929.859457 hp
EWURA reports 2,842.96 MW on the main grid and 38.372 MW off-grid, with TANESCO holding 92.31% of it. Installed capacity is what the country could generate at once, not what it generates on an average day.
Source: EWURA Fact Sheet — electricity sub-sector (installed capacity) · verified 2026-09-14
Related conversions
More power conversions you can convert instantly.
Related calculators
Try these calculators that use power measurements.