Skip to content
Calculator

BTU per hour to Watts Converter

Convert BTU per hour (BTU/h) to Watts (W) instantly, or use the conversion table below to look up common values.

1 BTU/h = 0.293071 W

BTU per hour to Watts conversion table

BTU per hour (BTU/h)Watts (W)
10.293071
20.586142
30.879213
41.172284
51.465355
102.930711
257.326777
5014.653554
10029.307107

How to convert BTU per hour to Watts

1 BTU/h equals 0.293071 W. Use the converter above for any value, or read the table for common conversions.

W = BTU/h × 0.29307107 · BTU/h = W × 3.4121416351330756

Multiply a btu per hour figure by 0.293071 to get watts, or divide it by 3.412142 to go the other way.

Worked examples

  • 1 BTU/h= 0.293071 W
  • 5 BTU/h= 1.465355 W
  • 10 BTU/h= 2.930711 W
  • 100 BTU/h= 29.307107 W
  • 500 BTU/h= 146.535535 W

What these units are

BTU per hour (BTU/h). One BTU per hour is 0.29307107 watts. It is used for air-conditioning and heating capacity, where '12,000 BTU' means roughly 3.5 kW.

Watts (W). The watt is the SI unit of power: one joule per second. It is used for light bulbs, small appliances and solar panel ratings; an LED bulb is typically 5 to 15 watts.

Metric power conversions are exact. Check whether a horsepower figure is mechanical or metric before comparing two engines.

Converting BTU per hour to Watts in practice

Working in btu per hour

One BTU per hour is exactly 0.29307107017222 watts, because one BTU is exactly 1,055.05585262 joules and an hour holds 3,600 seconds. The symbol is BTU/h.

Air conditioners, heat pumps, furnaces and chillers are rated in BTU per hour, and the figure on a room air conditioner describes its cooling capacity. Heating and cooling engineering uses the same unit for equipment sizing.

BTU per hour measures a rate, so it must be multiplied by a duration to produce an energy amount. Converting it to watts uses the exact factor, and 12,000 BTU per hour works out to about 3.5 kilowatts.

Treating BTU per hour as a unit of energy is a common error, since the same letters without the time element name an amount. A capacity rating and a consumption figure are therefore different quantities.

Cooling and heating capacities are quoted in BTU per hour, the electrical draw of the same equipment is quoted in kilowatts, and its motor may be quoted in horsepower. Choosing the wrong sibling changes the number by a factor of more than three.

Reading the result in watts

The watt is the SI unit of power: one joule of energy transferred each second. Its symbol is W, and it is the base from which every larger power unit is built.

Watt ratings appear on light bulbs, televisions, kettles, solar panels, inverters and small generators. Physics and engineering use the watt for every rate of energy transfer, from a laser to a motor.

Because power is a rate and energy is an amount, a watt multiplied by a duration gives energy in joules or watt-hours. Metric steps above the watt are exact powers of one thousand.

A frequent error treats the watt as a quantity of energy, so an appliance rating is read as consumption. Power needs a time period before it becomes an amount of energy.

Watts suit appliance and electronics figures, kilowatts suit generators, inverters and solar arrays, and megawatts suit grid capacity. Milliwatts cover indicator lights and small sensors. Reading a generator rating in watts rather than kilowatts multiplies the number by a thousand and misstates the scale.

Checking a btu per hour to watts conversion

Within the metric units a power conversion is a power of a thousand: watts to kilowatts, kilowatts to megawatts, and back. Those pairs are decimal shifts and a reader can do them without a converter.

Anything involving horsepower is a multiplication by a definition rather than a shift, and there are two definitions. Mechanical horsepower is exactly 745.7 watts and metric horsepower exactly 735.49875 watts, so the same engine carries a larger figure in mechanical horsepower than in metric.

When checking a power conversion, convert to watts first, because every unit in this dimension is defined against the watt and the intermediate value makes the comparison obvious. The trap is comparing a horsepower figure with a kilowatt figure without establishing which horsepower was quoted.

Tanzania reference points

Real quantities, converted into the units on this page.

  • Tanzania's installed electricity generation capacity

    2,881.332 MW = 9,831,512,881.841255 BTU/h = 2,881,332,000 W

    EWURA reports 2,842.96 MW on the main grid and 38.372 MW off-grid, with TANESCO holding 92.31% of it. Installed capacity is what the country could generate at once, not what it generates on an average day.

    Source: EWURA Fact Sheet — electricity sub-sector (installed capacity) · verified 2026-09-14

Related conversions

More power conversions you can convert instantly.

Related calculators

Try these calculators that use power measurements.