Acres to Square feet Converter
Convert Acres (ac) to Square feet (ft²) instantly, or use the conversion table below to look up common values.
Acres to Square feet conversion table
| Acres (ac) | Square feet (ft²) |
|---|---|
| 1 | 43,560 |
| 2 | 87,120 |
| 3 | 130,680 |
| 4 | 174,240 |
| 5 | 217,800 |
| 10 | 435,600 |
| 25 | 1,089,000 |
| 50 | 2,178,000 |
| 100 | 4,356,000 |
How to convert Acres to Square feet
1 ac equals 43,560 ft². Use the converter above for any value, or read the table for common conversions.
ft² = ac × 43560 · ac = ft² × 0.00002295684113865932Multiply a acres figure by 43,560 to get square feet, or divide it by 2.2957e-5 to go the other way.
Worked examples
- 1 ac= 43,560 ft²
- 5 ac= 217,800 ft²
- 10 ac= 435,600 ft²
- 25 ac= 1,089,000 ft²
- 100 ac= 4,356,000 ft²
What these units are
Acres (ac). An acre is 4,046.8564224 square meters, about 0.4047 hectares. It is the traditional land unit of the UK and US and is still used for land in parts of East Africa.
Square feet (ft²). A square foot is 0.09290304 square meters. It is the standard unit for floor area and property listings in the United States and the UK.
Every factor is an exact definition, so the only loss is display rounding. Land figures quoted in acres and hectares are usually rounded at the source.
Converting Acres to Square feet in practice
Working in acres
An acre is exactly 4,046.8564224 square meters, an area of 4,840 square yards, or one chain by one furlong. It is a unit of area, not of length.
Land titles, farm sizes, plots and ranches are described in acres in the United States, the United Kingdom and parts of the Commonwealth. Estate agents quote plot sizes in acres.
One acre equals 0.40468564224 hectares exactly, and a square mile holds exactly 640 acres. The site rounds displayed output, so a figure converted to hectares and back may return one digit away.
The classic mistake is treating an acre as a square of fixed side length; it is any shape with that area, and an acre is roughly 209 feet square only when square. Quoting acres from a deed written in hectares also invites error.
Acres and hectares both describe land, with one acre under half a hectare. A plot stated in hectares is about 2.47 times the same number of acres, so quoting the wrong unit makes land look far larger or smaller.
Reading the result in square feet
A square foot is the area of a square with sides one foot long, exactly 0.09290304 square meters. It is a unit of area and not a unit of length.
Floor area in property listings, apartment sizes, tiles, paint coverage and roofing are quoted in square feet in the United States and several other markets. Carpets and timber are sold this way too.
The conversion to square meters is exact because the foot is exactly 0.3048 meters and the square of that is 0.09290304. Results are printed rounded, so a square foot figure changed to square meters and back may lose a digit.
A frequent mistake is multiplying a length in feet by itself when only one dimension was measured, or converting a linear foot rate to a square foot rate directly. The two measure different things.
Square feet measure rooms and buildings, square meters do the same on metric plans, and acres measure land. A square meter is about 10.76 square feet, so a floor area quoted in the wrong unit is off by roughly a factor of ten.
Checking a acres to square feet conversion
Area factors are the square of the corresponding length factors, so the numbers move much faster than a reader expects. A square meter contains 10,000 square centimeters, and a square kilometer a million square meters, not a thousand.
The units that share a name across systems are still different sizes: a square mile and a square kilometer differ by a factor of about 2.59, and an acre is a fixed area rather than a square with equal sides, so it does not convert like the length units it is named after.
Land is where the reciprocal matters most, because acres and hectares are both in use for the same plots. When a figure moves between them, check it against a shape you can picture — a hectare is a square 100 meters on each side — rather than against the number alone.
Tanzania reference points
Real quantities, converted into the units on this page.
The total surface area of Tanzania, including Zanzibar
947,303 km² = 234,083,669.17999 ac = 10,196,684,629,480.37 ft²
Source: UN Statistics Division — World Statistics Pocketbook, country profile: Tanzania · verified 2026-09-14
Related conversions
More area conversions you can convert instantly.